How do i get sails to look like they are taking wind? - boat curtain rods
My school is putting the play "The Odyssey." I need a way to sail a ship at a time, "the choice of words will find." I can not with the fans, because they interrupt to the curtains. Has anyone ideas of "cheap?
Monday, February 1, 2010
Boat Curtain Rods How Do I Get Sails To Look Like They Are Taking Wind?
5 comments:
Ah, the annoying problem of the "stage" wind moved the trailers ... I had the fans on the hurricane in a production of "Mister Roberts use" ... Only weighted curtains with a tube does not go so ...
For your specific problem, I suggest, in a very light material that can "wave" or "keel" with a sailing very light spectrum.
Rods Fiberglass can also be inserted at the end of the vertical seam of a candle (I'm assuming you are using) a square sail, and then folded with a hidden line to give the allusion is full of air.
I hope you can delete it ... sounds like a fascinating problem
The mast can be used in PVC pipe with holes drilled about 1 cm apart, upper and then run the lower end to a compressor (not) when the air valve will be immediately made sail only. I do not think that it fill the sails, but you will have the illusion of wind.
Maestro, you need to s, love m
Blow in
Post a list of easy, "boat", as it is tilted. Weight of candles, should provoke a search for "complete." Try to have it! Fuller candles more likely when the sails cut to a certain depth to them. Sailing is not flat - they are like an airplane wing. Good luck with your production!
Insert the thin PVC pipe into the pavement on the sides and more difficult for a pipe at the bottom. When the eye of the wind is behind the bottom bar should be lifted to examine the parties and see windfilled.
Put a piece of fishing line in one or both outer sides, so that you bend in one direction or they seem cute in May or
You can also fine wood moldings
Post a Comment